iGeeksBlog Logo Black

  • 👉🏻 Get our iOS 17 eBook 📚 for FREE 👈🏻

Stay Connected

How to fix “self-assigned ip address” issue on mac.

Ava

Key Takeaways

  • The self-assigned IP address error occurs when your Mac assigns itself an IP address instead of getting one from the router.
  • This usually happens due to network configuration issues, DHCP server problems, glitches in the firewall settings, unstable Wi-Fi connection, etc.
  • To fix the “self-assigned IP address” error on your Mac, renew DHCP lease, restart your network devices , rejoin your Wi-Fi , or check your network settings .

Is your MacBook struggling to access the internet, though your Wi-Fi or Ethernet works fine? This can be due to the self-assigned IP address error on your Mac. Worry not!

Here, I’ll share how to fix the internet not working due to a self-assigned IP address error on your Mac to regain a stable network connection. But before we jump into the troubleshooting steps, let’s understand what a self-assigned IP error is.

What does “self-assigned IP address” mean on Mac? 

The “self-assigned IP address” error on Mac refers to a situation where your device assigns an IP address and sets up an ad-hoc network instead of obtaining one from the network router or DHCP (Dynamic Host Configuration Protocol) server.

This self-assigned IP address is not legitimate or acknowledged on the network. That’s why your Mac cannot connect to the internet or other devices on the network, resulting in limited or no network connectivity.

This issue occurs due to several reasons such as:

  • Network configuration conflicts
  • DHCP server unavailability
  • Problems with Mac’s network
  • Unstable Wi-Fi connection
  • Wrong Firewall settings
  • Outdated macOS

But you can fix the issue with a few simple methods. Let’s learn them!

How to fix “self-assigned IP address” error on Mac

There are 12 ways to fix the problem, from simple checks to more advanced changes. It would help if you tried them in the order provided.

1. Check your connection

Before diving into Mac-specific settings, ensure that your router is functioning correctly and located near your Mac to obtain a valid IP address. Besides, if you are using an Ethernet connection, plug in the cable snugly.  

I also check to validate that the cable has no fault and is in good condition. Moreover, If you are using an old Wi-Fi router, discard it and get a new one to obtain a smoother connection.

2. Reboot your network devices

Restarting both your modem and router can often resolve temporary network glitches. Power off the devices, unplug the cables, and wait a few seconds. It will help them cool down, as excessive heat can cause malfunctions.

After that, plug all cables, connect them to the power outlet, and turn them back on. In the meantime, restart your Mac once to iron out any bugs in macOS.   

  • Click the Apple logo .

Just click the Apple logo → choose Restart on your Mac

3. Renew DHCP Lease on macOS

This method is effective when the assigned IP address may have expired or encountered conflicts. When you renew the DHCP Lease, your Mac requests a new IP address from the DHCP server. It ensures a valid configuration and resolves connectivity issues.  

  • Open the same TCP/IP tab window from Wi-Fi Details, as shown above. 

click tcp/ip, select renew dhcp lease in wi-fi settings

After renewing the lease, check if you can connect to your network. If that doesn’t help, try creating a New Network Location and renewing the lease.

4. Rejoin your Wi-Fi network

Sometimes, simply forgetting and rejoining your Wi-Fi network can solve the self-assigned IP address error on your Mac.   

Click Apple logo, System Settings

  • Turn off Wi-Fi for a few seconds and toggle it on.

click connect in wi-fi on mac

5. Check your connection settings

Verify that your Mac’s network settings are configured correctly. You must opt for the appropriate network settings to obtain IP addresses and DNS information automatically. 

  • Go to your Wi-Fi Details .  I have shown the steps above.  
  • Select TCP/IP from the left panel. 

click tcp/ip, select using dhcp in configure ipv4, select automatic in configure ipv6 in wi-fi settings

You may also try turning off the IPv6, as some users reported it conflicted with the IP address assigning procedure.

  • Click on the drop-down arrow beside Configure IPv6 . 

select dropdown beside configure ipv6, click link local only in wi-fi settings

6. Reset your Network Preferences on Mac 

Resetting the network preferences can help eliminate IP address misconfiguration, causing the internet to not work. So, you must delete specific network connectivity-related files from your MacBook.

  • Launch  Finder .

Go to Folder to clear cache

  • Enter your Mac password to authenticate the deletion.
  • Restart your Mac. It will automatically recreate the deleted files.
  • Log in and connect to your Wi-Fi network.
  • Go to the  TCP/IP  setting again and check the router files.

7. Create a new network location

Creating a new network location lets your Mac start fresh with network settings and eliminate a self-assigned IP address.  

  • Click the  Apple logo →  System Settings .

Click the three-dots icon

  • Wait for a few seconds until your Mac connects to your Wi-Fi.

Repeat the steps of renewing the DHCP lease on your Mac, and then try connecting to your network.

When you try to perform configuration changes to the system, your Mac’s firewall experiences configuration issues. Let’s fix this problem by resetting the Firewall.

8. Reset the Firewall on your Mac

  • In the menu bar, click  Go  → Go to   Folder .

go to library preferences folder on mac

  • Restart your Mac.

After your system boots, it’ll ask you to allow access to numerous programs and services. Enable access depending upon your choice. Then, try connecting to your network and check if the self-assigned IP address error persists.

If you are unsure about deleting the Firewall files, you may temporarily disable it. Toggling off the Firewall on your Mac can help determine if it’s causing conflicts with network connectivity.

  • Select  Network  from the left panel → Choose Firewall .

Turn off your Mac Firewall

  • Restart your Mac and turn it on again.

9. Set Service Order from Mac’s network settings 

Adjusting the service order can prioritize the network interface, ensuring your Mac connects to your preferred network. 

  • Click the  Apple logo →  System Settings →  Network .

click set service order in network settings

10. Change DNS Servers on macOS

Discarding existing DNS and switching to alternative DNS servers can resolve DNS-related issues that may contribute to the self-assigned IP address error.  

  • Open System Settings → Wi-Fi → Click Details beside your Wi-Fi name.

select dns, click plus sign in wi-fi settings

  • Add   these numbers: 8.8.8.8 8.8.4.4 1.1.1.1 9.9.9.9

add dns addresses, click ok in wi-fi settings

11. Check for conflicting IP address 

Ensure that no other devices on your network use the same IP address as your Mac. Check your router’s DHCP client list and verify that all devices have unique IP addresses assigned.

12. Disable VPN 

If you have a VPN service enabled, disable it temporarily to see if it resolves the self-assigned IP address error. Open your Mac’s VPN settings and turn off the VPN connection. 

Bonus fixes 

You may need to attempt more complex fixes if the troubleshooting techniques outlined above do not fix the self-assigned IP address problem on your Mac:

  • Update your Mac to the latest OS version.
  • Verify your Mac is not infected with any malware or viruses. 
  • Ensure your network devices are operating well and there are no hardware problems. 
  • Restart your router or modem
  • Reset NVRAM or PRAM on Mac to clear up the system settings memory. 

Tips to prevent self-assigned IP address issues on Mac

Self-assigned IP address error is indeed frustrating as it prevents your Mac from accessing the internet. So, you must take some precautions to avoid such a nuisance in the future.

  • Regularly update your Mac
  • Try to restart your Mac, router, or other network devices once in a while
  • If your router or modem is outdated, replace it with a new one to get optimal performance. Also, configure the network with high-quality equipment.
  • Connect your Mac to only one active network. I suggest using an ethernet cable for a stable connection.
  • Don’t connect too many devices to your Wi-Fi at a time, as it may create network overcrowding.

Get back your smooth internet access!

Encountering a self-assigned IP address error on your Mac hampers your work, so you should address it ASAP. You can tackle the issue and restore a stable and reliable network connection using these troubleshooting techniques. 

If the problem isn’t resolved, contact Apple Support and seek assistance.

Explore more…

  • MacBook connects to Wi-Fi but has no Internet? 12 Fixes  
  • Wi-Fi not working on Mac? 10 Ways to fix!  
  • How to Run Wi-Fi Diagnostics on Mac for Better Network Connections  
  • How to fix IP address conflict on Mac: Simple solutions to fix it!

Readers like you help support iGeeksBlog. When you make a purchase using links on our site, we may earn an affiliate commission.  Read Disclaimer .

' src=

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Macdentro.com

Press ESC to close

self assigned ip address mac

How to Fix the Self Assigned IP Address Issue on Mac

At times macOS users face the self-assigned IP address malfunction on their computer. Your Mac will keep alerting you to the ‘internet not working’ pop-up even if you have a Wi-Fi network connection.

It allows the network interface to make a malfunctioning ad-hoc network. There can be many reasons for network issues like a broken cable, DHCP server problem, network location, etc. But, it gets better if you know the correct way to troubleshoot the issue.

Table of Contents

Fixes for the self-assigned IP address issue

Self-assigned IP issues can frustrate users and cause internet issues. But, fret not, you can fix self-assigned IP address malfunction using any of the methods mentioned below:

  • Restart your modem

Before trying any other method to fix the internet issue restart your modem to see if it works. Click the ‘Wi-Fi’ button from the top menu on the Mac to turn it off. Please wait for a few minutes and then turn it back on. Check to see if the issue is fixed.

If this hack works, you will see the Wi-Fi connection running on your Mac with a proper IP address.

  • Re-enable the network preferences

self assigned ip address issue mac

To reset network preferences on your computer, follow these steps:

  • Open Mac, launch ‘Finder,’ and in the top menu bar, tap on ‘Go to Folder’ from the drop-down menu of the ‘Go’ bar
  • A new window will appear, type ''/Library/Preferences/SystemConfiguration/'' and press enter
  • The System Configuration window will open. Then delete the following commands: ‘ com.apple .airport.preferences.plist, Networkinterface.plist and preferences.plist’ to reset network configurations
  • Please only delete the files if you have no issue losing the network configuration
  • Please switch off the Mac and then switch it back on; try and link to the Wi-Fi again
  • Open TCP/IP settings again and look for the files that you deleted
  • You will find the removed files back in the old folder

self assigned ip address issue mac

  • Renew DHCP lease

One of the most common fixes to the ‘self-assigned IP issue’ is to renew the DHCP lease. A DHCP lease temporarily assigns an IP address to a device connected to the internet.

If the internet connection is malfunctioning, follow these steps to renew your DHCP lease:

  • Tap the Apple logo on the top-left menu bar, then visit the ‘System preferences’ section
  • Then click on ‘Network settings’ and click ‘Advanced’ in the Wi-Fi section
  • Then select the ‘TCP/IP’ section and tap on the ‘Renew DHCP lease’ button and select OK
  • After renewing the lease, check if you can connect to your Wi-Fi

self assigned ip address issue mac

  • Make a different network location/ new location

One way to fix self-assigned IP is to set up new network locations on your Mac. Follow the steps below to make a new network location:

  • Tap on the Apple logo from the menu bar and select ‘System preferences’
  • Enter the ‘Network settings’ then tap on ‘Drop-down menu’ near the Location tab
  • Then tap on ‘Edit locations’ and tap on the ‘+’ button and add a ‘new network location’ and tap on done
  • Choose ‘Wi-Fi’ or Ethernet; if not selected automatically
  • Then press on ‘Advanced’ button and again press the ‘Renew DHCP lease button’ and enter
  • This will set a ‘new location’ on the device
  • Reset Firewall

Primarily self-assigned IP address malfunction occurs when the system’s Firewall undergoes configuration problems. If you have performed significant configuration changes on a Mac, settings may not migrate properly. It causes a Firewall issue and might disrupt the network connection.

To fix the firewall configuration issue, follow these steps:

  • Click the ‘Finder’ icon to launch it, then select ‘Go to folder’ in the ‘Go’ menu bar
  • In the pop-up window, enter the following command /Macintosh HD/Library/Preferences/
  • In the new window, delete the ‘com.apple.alf.plist’ command
  • After the Mac restarts, reboot it and check if the Wi-Fi connects

self assigned ip address issue mac

Note that after the system boots, you would have to allow connections for the numerous programs temporarily. 

  • Setup the service order in network settings

If your Mac has a self-assigned IP address issue, try resetting the service order of Wi-Fi in the network settings.

To set ‘Service order’ on Mac, follow these steps:

  • Select the Apple logo on the screen and click ‘system preferences’
  • Click on ‘Network icon and then press on the gear icon
  • Then tap ‘Set service order,’ and drag the services you are using at the start of the file
  • For example, if you are utilizing Wi-Fi, select ‘Wi-Fi’ and put it on the first number

self assigned ip address issue mac

  • Change DNS servers

DNS servers change the domain name to IP addresses. Try changing the DNS servers to see if the issue fixes. Follow these steps:

  • Select the Apple logo and click ‘system preferences,’ then click on the ‘Network’ icon
  • Select the Wi-Fi icon or Ethernet you use (if not selected already)
  • Then choose the ‘DNS’ tab in the ‘Advanced’ section and press ‘+.’
  • Add the following numbers to the DNS server list: ‘8.8.8.8, 8.8.4.4, 1.1.1.1, 9.9.9.9’ and click ‘OK’
  • It will most likely fix the self-assigned IP address problem in your Mac

self assigned ip address issue mac

Contact an Apple support team tech. If the above methods do not fix your Mac’s self-assigned IP address issue.

What does self-assigned IP mean on Mac?

Self-assigned IP is one of the reasons why you are unable to use the internet on your device. It mainly occurs when your network router does not provide your device’s IP address, causing internet connection issues.

How do I give my Mac a static IP address?

You can give your Mac a static IP by following the steps below:

  • Select the Apple logo and click ‘System preferences’
  • Click on the ‘Network’ tab and then select the ‘Advanced button’ 
  • ON TCP/IP section, open the configure IPv4 list and select ‘manually’
  • Enter your IP settings in the field, and the static IP address will the assigned 

Conclusion 

By now, you must have learned how to fix self-assigned IP on your computer. Though it is not a huge problem, it does cause a lot of frustration among users. Hopefully, you found the article helpful and learned how to fix network malfunctions on your mac OS.

Share Article:

Marid is a lifelong tech enthusiast and is the lead editor of Macdentro.com. An expert on all things Apple and a lifelong Mac user. Marid has over 10 years of experience using Apple products including the Apple watch, Ipad and etc

How to Set Alarm On Mac? 6 Methods

Restoring trash on mac – a guide for mac trash recovery to recover deleted files, leave a reply cancel reply.

Save my name, email, and website in this browser for the next time I comment.

TL Logo New

How to Fix Self-assigned IP Address Error on Mac

MacBook

The self-assigned IP address error on a MAC is a common issue when the device cannot obtain an IP address from the router or DHCP server. It can cause Internet connectivity problems and make it difficult to access local network resources.

In this article, you will learn the causes of this error and provide troubleshooting steps to resolve it.

Content Table

What Does it Mean When It Says WiFi Has a Self-Assigned IP Address?

Self-Assigned IP Address Error

When a device says it has a “ self-assigned IP address ” on a WiFi network, it cannot obtain a valid IP address from the router. It can happen for various reasons, such as a conflict with another device on the network with the same IP address or an issue with the router’s DHCP (Dynamic Host Configuration Protocol) settings. 

Without a valid IP address, the device cannot access the internet or communicate with other devices on the network. To fix this issue, try restarting the device and router, checking for firmware updates, or manually changing the IP address.

What Are The Reasons for Self-Assigned IP Address Errors?

Several reasons for a self-assigned IP address error can occur on a MAC . Some of the most common causes include:

  • Incorrect network settings: The network settings on the MAC may be configured incorrectly, which can prevent it from obtaining an IP address from the router or DHCP server.
  • DHCP server issues: The DHCP server may be down or not working properly, which can prevent the MAC from obtaining an IP address.
  • Router issues: The router may malfunction or not be configured properly, which can prevent the MAC from obtaining an IP address.
  • Malware or viruses: Malware can infect the MAC and cause it to assign itself an IP address, preventing it from connecting to the internet or local network resources.

Troubleshooting Steps to Fix a Self-Assigned IP Address Error on a Mac

To fix a self-assigned IP address error on a MAC , you can try the following troubleshooting steps:

  • Check network connection: Ensure that the MAC is connected to the network and that the network cable is securely plugged in.

MacBook - Self-assigned IP Address Error on Mac

  • Renew DHCP lease: Try renewing the DHCP lease on the MAC by going to the “ System Preferences ” > “ Network ” > “Select Network” >” Advanced ” > “ TCP/IP ” tab, then click on the “Renew DHCP Lease” button.

Renew DHCP Lease - Self-assigned IP Address Error on Mac

  • Reset the router: Try resetting it by unplugging it for 30 seconds, then plugging it back in.

Power Off Router - Self-assigned IP Address Error on Mac

  • Check for updates: Make sure the MAC runs the latest software updates.

Update macOS - Self-assigned IP Address Error on Mac

  • Disable VPN: If you are using a VPN, disable it and see if it helps.
  • Check for conflicting IP addresses: Make sure that no other devices on the network use the same IP address as the MAC.
  • Disable IPv6: Some users have reported disabling IPv6 on the MAC can fix the issue.

Disable IPv6 Mac - Self-assigned IP Address Error on Mac

Some Bonus Fixes:

If the troubleshooting steps above do not resolve the self-assigned IP address error on your MAC , you may need to try some advanced solutions:

  • Check for malware or viruses: Make sure that the MAC is not infected with malware or viruses which can cause this issue.
  • Reinstall network adapter driver: Try reinstalling the network adapter driver on the MAC.
  • Check for hardware issues: Make sure that the network adapter on the MAC is functioning properly and that there are no hardware issues.
  • Reset NVRAM or PRAM: Try resetting the NVRAM or PRAM on the MAC.

Reset NVRAM - Self-assigned IP Address Error on Mac

  • Contact technical support: If none of the above steps resolves the issue, contact technical support for further assistance.

It’s important to note that maintaining a stable network connection is crucial for the smooth operation of any device. A self-assigned IP address error can be a frustrating problem to deal with, but by following the steps outlined in this blog post, you should be able to resolve it quickly and get back to using your MAC as usual.

Additionally, it is always a good practice to keep your MAC updated, regularly check for malware and viruses, and ensure that the network adapter is working properly. It can help prevent self-assigned IP address errors and other network-related issues from occurring in the future.

How do I Fix the 169.254 IP Address on Mac?

If you’re experiencing an IP address of 169.254 on your Mac, your computer cannot obtain an IP address from your router. Various issues, such as a malfunctioning router or a conflict with another device on your network, can cause it. 

To fix this, you can restart your router and Mac and check for any conflicting devices on your network. Depending on whether the problem persists, you may need to configure your IP address settings on your Mac manually. 

You can do it by going to System Preferences > Network > Advanced > TCP/IP . Consult your router’s manual or contact your internet service provider for specific instructions.

Manual IP Config Mac - Self-assigned IP Address Error on Mac

How do I Fix DHCP on Mac?

Dynamic Host Configuration Protocol, or DHCP, is a crucial network component in most networks. The device assigns IP addresses to devices connected to the network. Without it, devices may be unable to connect to the internet or communicate with other devices on the network. If you are experiencing issues with DHCP on your Mac, there are a few steps you can take to fix the problem.

The first step is to check your network settings. Make sure that your Mac is set to obtain an IP address automatically and that DHCP is enabled. If these settings are incorrect, you may need to enter them manually. If this does not fix the issue, try restarting your router or modem. Sometimes, a simple reboot can resolve DHCP issues.

Another solution is to clear your DHCP lease. It will force your Mac to request a new IP address from the DHCP server. To do this, open the Terminal app on your Mac, then type in “ sudo dhclient -r ,” followed by your admin password. It will release the current DHCP lease, and your Mac will request a new one.

Fix DHCP via Terminal - Self-assigned IP Address Error on Mac

If none of the above solutions works, your router may malfunction, or you might have a problem with your modem. Try contacting your internet service provider for assistance or checking for firmware updates for your router.

Various issues, including incorrect network settings, DHCP server issues, and router problems, can cause a self-assigned IP address error on a MAC. To fix this issue, you can try troubleshooting steps such as renewing the DHCP lease, resetting network settings, and resetting the router. 

In case these steps fail, you can try advanced solutions such as checking for malware or viruses, reinstalling the network adapter driver, and checking for hardware issues. If the problem persists, you may need to contact technical support.

Read : How to Fix if Mac Keyboard Not Working Properly?

Apple

Logo top

What is Self-Assigned IP and How to Fix it

self assigned ip address issue mac

The self-assigned IP error may prevent your Mac from connecting to the Internet. You may get an Internet connection error messages such as “Wi-Fi has the self-assigned IP address and will not be able to connect to the Internet.” If you investigate this issue further, you will see that the Network pane in System Preferences will also show a notification message saying “Self-Assigned IP” with a yellow dot instead of the regular “Connected” message under the network service, as you can see in the screenshot below. This problem may occur when Mac is connected to a wired, wireless (Wi-Fi), or hotspot connection.

Self-Assigned IP message in Network Settings

This problem occurs when a self-assigned IP address is issued to network interfaces. When this issue happens, not all computers connected to the same network may be affected. For example, in the same home, one Mac may have this problem while other similarly configured Macs may have no problem at all, even though they all are using the same Wi-Fi connection. This may mean that the root of the problem is how the problem Mac is configured. Several factors may cause this issue, such as:

  • Bad cable connections.
  • Not getting an IP from the router or modem.
  • Failure of the DHCP server.

Follow the steps below to address this problem. Please try the steps in this order. After trying each step, check to see if your problem is fixed. If it is not fixed and if you still see the Self-Assigned IP error, move to the next step.

Self-Assigned error troubleshooting steps

Check your router/modem : If you are connected over Wi-Fi, ensure that your Mac is not too far away from the router/modem.

Restart your router/modem and your Mac : You can do this easily. Simply disconnect the power cable to your router/modem. Wait 30 seconds. Then reconnect. Then restart your Mac. Click the Apple  menu and select Restart .

Renew DHCP Lease : On your Mac, open System Preferences and click on Network . Select the network service you want to connect to (e.g., Wi-Fi or Ethernet) and click on Advanced . This will open a new window. Select the TCP/IP tab and click the Renew DHCP Lease . Then click OK .

Renew DHCP Lease button

Check your connection settings : On your Mac, go to System Preferences > Network . Then select the network that shows this error and click Advanced . Select the TCP/IP tab and then make sure that “Configure IPv4” and “Configure IPv6” are set to Using DHCP and Automatically , respectively.

DHCP settings page

Then click on the DNS tab, and delete any DNS servers that are listed there. Select them one by one and click on the minus button to remove them. Do not forget to click OK and Apply when you are done.

Create a new network location : On your Mac, open System Preferences and Network . Open the Location drop-down menu and select Edit Locations . Click the plus (+) button and add a new location, give it a name and click Done . Now you have two locations: Automatic and your new location. Select this new location and then click Apply .

Network Locations

Now, we will add a new Wi-Fi or Ethernet service, whichever you are using. Click the plus (+) sign under the network services on the left, select the Interface (Wi-Fi, Ethernet, etc.) and name it, then click Create . Then click Apply .

New network create screen

Now select the Self-Assigned IP network and then click the minus (-) button to delete it. Then click Apply . Does this newly created service connect?

Reset the system firewall: We can do that by deleting its preference file . Open a Finder window and then click Go and Go to Folder from the top menu bar. Enter /Library/Preferences/ and click Go .

Preferences

Once the Preferences folder is open, find the com.apple.alf.plist file. Delete this file (or place it on your Desktop; if you are not happy with what happens, you can put it back). Then restart your Mac.

Firewall Preference file

Related articles

  • How To Reset Network Settings On Mac
  • How To Use Network Utility on Mac
  • Mac Wi-Fi Connected But No Internet Access
  • iPhone Will Not Connect To A Known Wi-Fi Network, Fix

self assigned ip address issue mac

Dr. Serhat Kurt worked as a Senior Technology Director specializing in Apple solutions for small and medium-sized educational institutions. He holds a doctoral degree (or doctorate) from the University of Illinois at Urbana / Champaign and a master’s degree from Purdue University. He is a former faculty member. Here is his LinkedIn profile and Google Scholar profile . Email Serhat Kurt .

Similar Posts

Downloads Folder Disappeared from the Finder Sidebar? How to Restore

Downloads Folder Disappeared from the Finder Sidebar? How to Restore

Although my Downloads folder was set to appear in the Finder sidebar, it suddenly disappeared. The…

Screenshots Not Working On Mac, Fix

Several macOS users have reported that they are unable to take screenshots and screen recordings. The…

Voicemail Icon Is Missing on iPhone, How to Bring It Back

You may notice that the Voicemail icon in the Phone app has disappeared from your iPhone…

Changes to Dock Don’t Stick, Updates Revert Back at Startup or Login

The Dock on your Mac enables you to interact with your Mac. It is a convenient…

Screen Time Not Working, Fix

Several users have reported that they are unable to use Screen Time properly on their iPhone,…

How to Fix iMessage Pictures Not Downloading After iOS 17

How to Fix iMessage Pictures Not Downloading After iOS 17

After updating to iOS 17, a frequently encountered issue is the inability to download photos in…

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Categories:

Support.com

  • Corporate Site
  •   Overview
  •   How it works
  •   For Home
  •   Step-by-Step Guides

ads

Resolve "Self-Assigned IP" Errors for Apple Mac

1   introduction: apple mac: resolve self-assigned ip address.

One possible result of the inability to get online is that you have what is referred to as a self assigned IP address. This usually happens when your router (which normally provides you an IP address) does not provide you an IP address to talk to other computers.

Example of a Self Assigned IP Address

This guide will help you to troubleshoot self assigned IP addresses.

2   Network: Reboot

One of the main causes with the inability to get on the Internet is that your networking equipment could have malfunctioned. Sometimes performing a reboot will resolve this issue.

Your network may consist of one or more of the following networking devices.

Next we will want to power cycle the networking devices.

Modem / Gateway

  • Unplug the power from the device.
  • Wait 30 seconds.
  • Plug the power back into the device.
  • Wait for the device to go online.

Access Point / Range Extender

3   macos: restart.

Apple menu with Restart option selected. Screenshot.

Any unsaved work will be lost.

?   Did this resolve your issue?

We're here to help, call or chat with a tech pro 24/7..

Next we need to know how your device connects to the Internet.

  • Wireless - You connect using a wireless router or access point.
  • Wired - You use an Ethernet cable plugged into your gateway/router/switch and the other end is plugged into your device.

Apple Menu with System Preferences highlighted.

  • Your device will no longer join this Wi-Fi network unless you reconnect once again.

macOS Wi-Fi menu with Wi-Fi On highlighted.

  • Networks that have a lock icon next to their name require a password. After you select your network, enter the network password when you're prompted. If you don't know the network password, check with the owner of the Wi-Fi network you're trying to join.

Finder highlighted

While Ethernet connections are typically the most reliable connection to the Internet, there are still some issues that can arise. Test your connection after each of these steps.

  • Try using another Ethernet cable.
  • If you are plugged into a switch, try plugging directly into your Gateway or Router.

Privacy Matters

Support.com is committed to your privacy.

  • Terms of Use

Cookie Preferences

This website uses the following types of services. Learn more from our Cookie Policy .

Strictly Necessary

Strictly Necessary services are absolutely necessary for core functions such as navigating the page or accessing secure areas. The website cannot function properly without these cookies.

  • Skip to main content
  • Skip to primary sidebar

Technology Simplified.

Self-Assigned IP Address Error on Mac: How to Fix?

By: Waseem Patwegar | November 15, 2022

If Wi-Fi or Ethernet is not working on your MacBook due to “Self-Assigned IP Address” error, you can find below the steps to restore network connectivity on your Mac.

Self Assigned IP Address On Mac

Self-Assigned IP Address on Mac

In a typical case of this nature, the MacBook appears to be connected to the Network (WiFi or Ethernet), but it fails to load webpages and comes up with “Self-Assigned IP” error.

As indicated by the wordings (Self-Assigned IP Address), the reason for this problem is due to your Mac Assigning itself an IP Address that is not valid or not recognized on the network.

Luckily, in most cases the problem of No Internet connectivity due to “Self-Assigned IP Address” can be fixed by rebooting the modem.

1. Power Cycle Modem/Router

Before going ahead with other methods, simply disconnect the Modem/Router from its power supply source > wait for 60 seconds and reconnect the Modem/Router back to its power supply.

After this, you should find internet working properly on your Mac, as it starts using a valid IP Address on both WiFi and Ethernet to connect to the network.

2. Renew DHCP Lease

1. Click on Apple Logo in the top menu-bar and select System Preferences… in the drop-down menu.

Open System Preferences on Mac

2. On System Preferences screen, click on the Network Icon.

Network Option in System Preferences Screen on Mac

3. On Network screen, select your Network ( Ethernet or WiFi ) in the side-menu and click on Advanced .

Advanced Option in Network Settings Screen on Mac

4. On the next screen, switch to TCP/IP tab and click on Renew DHCP Lease button.

Renew DHCP Lease Option on Mac

5. Click on OK to save the revised settings.

After the DHCP lease is renewed, you should be able to connect to internet

3. Delete PLIST Files

The problem of No Internet on Mac due to Self-assigned IP Address can be fixed by removing certain files related to network connectivity on your computer.

1. Click on the Finder Icon in taskbar > click on the Go tab in top-menu bar and select Go to Folder option in the drop-down menu.

Open Go to Folder on Mac

2. In Go-to window, Type /Library/Preferences/SystemConfiguration/ and click on the Go button.

Go to /Library/Preferences/SystemConfiguration/ Folder on Mac

4. In System Configuration folder, delete the following folders (right-click on the Folders and move them to trash).

  • com.apple.airport.preferences.plist
  • com.apple.network.identification.plist
  • NetworkInterfaces.plist
  • Preferences.plist

Note: Your Mac will automatically recreate above Folders when it restarts.

5. Shutdown the MacBook > Wait for 30 seconds and Restart the Mac again and see if you can now connect to the internet.

4. Set Service Order

Make sure that your MacBook is always connecting to your preferred network type (WiFi or Ethernet).

1. Click on Apple Logo > System Preferences > Network > On the Network screen, click on the Gear icon and select Set Service Order option in the drop-down menu.

Set Service Order Tab on Mac Network Settings Screen

2. On Service Order window, drag your preferred Network (WiFi or Ethermet) to the top position.

Choose Preferred Network Type on Mac

3. Once you are done, click on OK to save the changes.

5. Create New Network Location

If you are still unable to connect to Internet, create a New Network Location on your Mac and renew its DCHP lease.

1. Click on Apple Logo > System Preferences > Network > On the Network screen, open the Location menu and select Edit Locations option.

Edit Network Locations on Mac

2. On the next screen, click on the Plus icon to Add New Location.

Add Network Location Option on Mac

3. On the next screen, type a Name for the New Network Location and click on Done .

Name New Network Location Option on Mac

4. After creating new location, select either WiFi or Ethernet in the side menu and click on Advanced .

5. On the next screen, switch to TCP/IP tab and click on Renew DHCP Lease .

6. Click on OK to save the new settings.

This should certainly fix “Self-Assigned IP Address problem and restore network connectivity on your Mac.

6. Switch to Google DNS

If your Mac is frequently struggling from Network connectivity issues, the problem might be due to the DNS Servers of your Internet Service provider being busy and clogged up.

To fix this issue, you can consider switching the DNS servers on your Mac to Google DNS or Open DNS.

  • Tips to Speed Up Slow MacBook, Mac Mini and iMac
  • How to Speed Up Slow Safari Browser on Mac

iOS Hacker

Apple Cancels The Apple Car Project

Apple releases ios 17.4 release candidate to developers ahead of public release, best accessories for 16-inch macbook pro in 2024.

  • Accessories

Best Weight Loss Apps For iPhone In 2024

  • Zip-rar tool
  • Zip browser

How To Fix Internet Not Working Due To Self-Assigned IP Address Issue

self assigned ip address issue mac

If your Mac is connected to a working Wi-Fi network but the Internet is still not working, then we have got the solution for you. A lot of times your Mac is issued a self-assigned IP, which causes the Internet to not work on the machine.

Despite the same Wi-Fi network working on other devices, the Mac will simply show no internet connection error and Internet will not work on it. In these situations Wi-Fi has the self-assigned IP address and will not connect to the Internet despite the Internet working on other devices.

On Mac’s Wi-Fi page the Wi-Fi will also show the Self-Assigned IP Address text instead of connected. This is a very annoying problem that can cause Internet to not work on your Mac. Not having a working Internet connection on your Mac due to Mac’s self assigned IP problem can prevent you for doing work and render your Mac useless.

Good thing is self-assigned IP issue on Mac is quite easy to solve. You can fix the self-assigned IP address issue and get the Internet to work again on your Mac by simply deleting a few files on your machine.

Simply follow the steps below from an administrator account and put the mentioned files in trash.

This solution works on all recent versions of macOS including macOS Ventura, macOS Monterey, macOS Big Sur and macOS Catalina.

Fix Self-Assigned IP Address Issue on Mac

You can use to solve the self-assigned IP address issue on your Mac running macOS Ventura, macOS Monterey, macOS Big Sur, macOS Catalina etc.

1. On your Mac launch finder and click on Macintosh HD. (Don’t see Macintosh HD? See here )

2. Click on the Library folder and go to Preferences.

3. Now click on the SystemConfiguration folder.

4. Next put the following files in trash.

  • com.apple.airport.preferences.plist
  • com.apple.network.identification.plist
  • NetworkInterfaces.plist

5. Restart your Mac.

Once the reboot has taken place the Internet will start working and self assigned IP address issue will be resolved.

If you don’t see all the files mentioned above, then just delete the ones that are present and reboot your machine.

How to Reset Mac’s IP address

In case you’re looking to reset your Mac’s IP address to solve internet connection problems with your computer, then the following instructions will help. If deleting the files mentioned above does not help, then the steps to reset Mac IP address can also prove helpful in fixing self-assigned IP Mac problem.

On macOS Ventura or later

Below you can find instructions on how to reset Mac IP address if you are running macOS Ventura or later.

1. Click on the Apple logo from the top menu bar and then click on System Settings .

2. Now click on Wi-Fi option from the side pane.

3. Make sure your Mac is connected to your Wi-Fi network. Then click on ‘ Details… ‘ located next to Wi-Fi’s name.

4. Now click on TCP/IP button from the left side pane.

5. Next find the ‘ Renew DHCP Lease ‘ button on the right side of the window and click on it.

6. Click on OK button and using the toggle next to Wi-Fi turn off Wi-Fi and turn it back on after a few seconds.

By performing these steps you should be able to solve self-assigned IP issue on your Mac and Internet should start working once again.

On macOS Monterey or earlier

Here’s how you can reset Mac IP address if you are running macOS Monterey or earlier on your Mac.

1. On your Mac open System Preferences.

2. Click on Network icon.

3. Make sure Wi-Fi is selected from the side pane and then click on ‘Advanced’ button.

4. Now click on TCP/IP from the top navigation bar.

5. Next click on ‘Renew DHCP Lease’ button.

6. Click OK to exit and from the top menu click on the Wi-Fi button and turn off Wi-Fi.

7. After a few seconds turn Wi-Fi back on and connect your Mac to your Wi-Fi network.

8. At this point Self-Assigned IP address issue should get solved and Internet should start working again.

There you have it, this is how you can easily and quickly fix Self-Assigned IP address issue on Mac and get your Internet connection working once again. If you have any questions regarding this tutorial, then feel free to let us know in the comments section below.

  • troubleshooting

self assigned ip address issue mac

Hello I recently instakked BIG SUR on my late 2013 macbook pro and I am having trouble tethering my Iphone XR to it. I can tether using wifi, but when I attempt to tether using bluetooth, my phone shows as connected in bluetooth preferences on my macbook and iphone, with the connection/link symbol shown on my iphone, but the internet will not work. In Network the bluetooth Pan shows an orange dot, STATUS: CONNECTED, but underneath it says ‘internet-not-working-self-assigned-ip-address-issue’. Do you have any ideas on how to fix this, I followed your instructions from the link ( https://ioshacker.com/how-to/fix-internet-not-working-self-assigned-ip-address-issue ) on your website, but each time I restart the computer the files that I put into the trash and delete from the trash re-appear in the system configuration folder. Only 2 of the 3 files you suggested to trash are in the folder, – com.apple.network.identification.plist – is not in the folder. Any advice appreciated.

I’m running Monterrey on my MacBook Pro and was having problem with the self-assigned IP and cannot connect to the Internet. I followed what your article suggested, several times, but was still unable to resolve the problem. Are there other suggestions that you think I should try? Thank you.

I just had the same issue and none of the fixes found online worked. I have McAfee Security software installed and there was a service running called McAfeeSystemExtensions. I deactivated the service within the Network settings and problem resolved.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

Notify me of new posts by email.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Sign Up for Our Newsletters

Related posts, best kvm switch docks for mac and windows pcs, selling your apple watch do this first, how to factory reset apple vision pro.

DeviceMAG

How to Solve the Self-Assigned IP Error on Macs?

Have you ever encountered the frustrating “self-assigned IP address” error on your Mac? If so, you're not alone. This common issue can cause your internet connection to fail, leaving you unable to browse the web or access online services. But fear not, as there are several steps you can take to fix this problem and get your Mac back online.

1. Reset your network preferences: Sometimes, network settings can become corrupted, leading to the self-assigned IP address error. To fix this, you can reset your network preferences by following these steps:

– Click on the Apple logo in the menu bar and select “System Preferences.” – Find and go to the “Network” settings. – Select your Wi-Fi or Ethernet connection, if it's not selected automatically. – Click on the “Advanced” button. – Go to the “TCP/IP” tab. – Click on the “Renew DHCP Lease” button. – Restart your Mac and check if the issue is resolved.

2. Create a new network location: If resetting your network preferences didn't work, you can try creating a new network location. This will create a fresh set of network settings, which may help resolve the self-assigned IP address error. Here's how to do it:

– Open the “Network” settings as mentioned above. – Click on the “Location” drop-down menu and select “Edit Locations.” – Click on the “+” icon to create a new location. – Give it a name (e.g., “New Location”) and click “Done.” – Select your new location from the drop-down menu and apply the changes. – Restart your Mac and check if the issue is resolved.

3. Reset the firewall on your Mac: In some cases, the firewall settings on your Mac can interfere with the network connection and cause the self-assigned IP address error. To reset the firewall, follow these steps:

– Open “System Preferences” and go to the “ Security & Privacy ” settings. – Click on the “Firewall” tab. – Click on the lock icon and enter your administrator password. – Click on the “Turn Off Firewall” button. – Restart your Mac and check if the issue is resolved.

4. Set Service Order from Mac's Network settings: Another potential solution is to change the service order of your network connections. Here's how to do it:

– Open the “Network” settings. – Click on the gear icon and select “Set Service Order.” – Drag your Wi-Fi or Ethernet connection to the top of the list. – Click “OK” and apply the changes. – Restart your Mac and check if the issue is resolved.

5. Change DNS servers on macOS: DNS (Domain Name System) servers translate domain names into IP addresses, allowing your Mac to connect to websites. Sometimes, changing the DNS servers can help resolve the self-assigned IP address error. Here's how:

– Open the “Network” settings. – Select your Wi-Fi or Ethernet connection. – Click on the “Advanced” button. – Go to the “DNS” tab. – Click on the “+” icon to add a new DNS server. – Enter the following DNS server addresses: 8.8.8.8 and 8.8.4.4 (these are Google 's public DNS servers). – Click “OK” and apply the changes. – Restart your Mac and check if the issue is resolved.

By following these steps, you should be able to fix the self-assigned IP address error on your Mac and regain your internet connection. However, if the problem persists, it may be worth contacting your internet service provider or seeking further assistance from a professional technician.

How Do You Stop Your Mac From Self Assigning IP Address?

To fix the self-assigned IP error on your Mac, follow these steps:

1. Reset your network preferences on Mac: – Open the “System Preferences” on your Mac. – Click on “Network.” – On the left-hand side, select the network connection you are using (e.g., Wi-Fi or Ethernet). – Click on the minus (-) button to remove the connection. – Confirm the action by clicking on “Apply” or “OK.” – Restart your Mac.

2. Renew DHCP lease on macOS: – Go to “System Preferences” and click on “Network.” – Select the network connection you are using (e.g., Wi-Fi or Ethernet). – Click on the “Advanced” button. – Go to the “TCP/IP” tab. – Click on the “Renew DHCP Lease” button. – Close the window and restart your Mac.

3. Create a new network location: – Open “System Preferences” and click on “Network.” – Select the network connection you are using (e.g., Wi-Fi or Ethernet). – Click on the “Location” drop-down menu and choose “Edit Locations.” – Click on the plus (+) button to create a new location. – Name the new location and click “Done.” – Apply the changes and restart your Mac.

4. Reset the firewall on your Mac: – Open “System Preferences” and click on “Security & Privacy.” – Go to the “Firewall” tab. – Click on the lock icon and enter your administrator password. – Click on the “Firewall Options” button. – Click on “Restore Defaults” or “Allow incoming connections.” – Apply the changes and restart your Mac.

5. Set Service Order from Mac's Network settings: – Open “System Preferences” and click on “Network.” – Click on the gear icon and select “Set Service Order.” – Drag the network connection you are using (e.g., Wi-Fi or Ethernet) to the top of the list. – Close the window and restart your Mac.

6. Change DNS servers on macOS: – Open “System Preferences” and click on “Network.” – Select the network connection you are using (e.g., Wi-Fi or Ethernet). – Click on the “Advanced” button. – Go to the “DNS” tab. – Remove any existing DNS servers by clicking on the minus (-) button. – Add new DNS servers by clicking on the plus (+) button and entering the server addresses (e.g., 8.8.8.8, 8.8.4.4 for Google DNS). – Click “OK” and apply the changes.

By following these steps, you should be able to resolve the self-assigned IP error on your Mac and establish a proper network connection.

self assigned ip address

How Do You Fix Your Self-Assigned IP Address On Your Mac Ethernet?

To fix a self-assigned IP address issue on your Mac Ethernet, you can follow these steps:

1. Click on the Apple logo in the menu bar and go to “System Preferences.” 2. In the “System Preferences” window, find and click on “Network.” 3. From the list of network connections on the left side, select your Ethernet connection. 4. Make sure that the Ethernet connection is selected and click on the “Advanced” button. 5. In the “Advanced” settings, go to the “TCP/IP” tab. 6. If the “Configure IPv4” dropdown menu is set to “Using DHCP,” change it to “Manually.” 7. Now, click on the “Renew DHCP Lease” button to release the current IP address. 8. After that, click on the “Apply” button to save the changes. 9. If you want to use specific DNS servers, go to the “DNS” tab and click on the “+” icon. 10. Add the desired DNS server addresses, such as 8.8.8.8 and 8.8.4.4, and click on “OK.” 11. click on the “Apply” button again to save the DNS server changes.

By following these steps, you should be able to fix the self-assigned IP address issue on your Mac Ethernet connection.

What Are The Self Assigned IP Address Ranges?

Self-assigned IP addresses, also known as Automatic Private IP Addressing (APIPA), are utilized by client computers when they are unable to obtain an IP address from a DHCP server. In such cases, the client computer will automatically assign itself an IP address from a specific range of addresses known as the APIPA range.

The self-assigned IP address ranges are as follows:

– 169.254.0.0 to 169.254.255.255

When a client computer activates APIPA and is unable to connect to a DHCP server, it will randomly select an IP address from this predefined range. It does this to ensure that it can still communicate on the local network, even without a valid IP address assigned by a DHCP server.

It is important to note that self-assigned IP addresses are only meant for local network communication and cannot be used for internet connectivity. These addresses are not routable on the internet, hence they are primarily used as a temporary solution until the client computer can obtain a valid IP address from a DHCP server.

The self-assigned IP address ranges are from 169.254.0.0 to 169.254.255.255, and they are automatically assigned by client computers when they are unable to obtain an IP address from a DHCP server.

A self-assigned IP address, typically in the range of 169.254.x.x, is an indication that your device, in this case, a Mac computer, was unable to obtain an IP address from the router or DHCP server. This issue can prevent your device from connecting to the internet or communicating with other devices on your network.

To fix this problem, there are several troubleshooting steps you can follow. Firstly, resetting your network preferences can help resolve any configuration issues that may be causing the self-assigned IP address problem. Renewing the DHCP lease is another option, as it forces your Mac to request a new IP address from the router.

If these initial steps don't work, creating a new network location can help by resetting all network settings to their default values. Resetting the firewall on your Mac can also be beneficial, as it may be blocking the necessary network connections.

Additionally, adjusting the service order in the network settings can ensure that your Mac prioritizes the correct network connection. Changing the DNS servers can also be helpful, as sometimes incorrect DNS settings can lead to self-assigned IP address issues.

By following these troubleshooting steps, you should be able to resolve the self-assigned IP address error on your Mac and regain normal network connectivity. Remember to consult the specific instructions for your macOS version for accurate guidance.

Related posts:

How to Connect Your GoPro to Your Mac? 1

Sanjeev Singh

macOS User Guide

  • What’s in the menu bar?
  • Work on the desktop
  • Search with Spotlight
  • Quickly change settings
  • Get notifications
  • Open apps from the Dock
  • Organize your files in the Finder
  • Connect to the internet
  • Browse the web
  • Preview a file
  • Take a screenshot
  • Change your display’s brightness
  • Adjust the volume
  • Use trackpad and mouse gestures
  • Use Touch ID
  • Print documents
  • Keyboard shortcuts
  • Apps on your Mac
  • Work with app windows
  • Use apps in full screen
  • Use apps in Split View
  • Use Stage Manager
  • Get apps from the App Store
  • Install and reinstall apps from the App Store
  • Install and uninstall other apps
  • Create and work with documents
  • Open documents
  • Mark up files
  • Combine files into a PDF
  • Organize files on your desktop
  • Organize files with folders
  • Tag files and folders
  • Back up files
  • Restore files
  • Change System Settings
  • Choose your desktop wallpaper
  • Add and customize widgets
  • Use a screen saver
  • Add a user or group
  • Add your email and other accounts
  • Automate tasks with Shortcuts
  • Create Memoji
  • Change your login picture
  • Change the system language
  • Make text and other items on the screen bigger
  • Set up a Focus to stay on task
  • Set up Screen Time for yourself
  • Use Dictation
  • Send emails
  • Send text messages
  • Make a FaceTime video call
  • Edit photos and videos
  • Use Live Text to interact with text in a photo
  • Start a Quick Note
  • Get directions
  • Work across devices using Continuity
  • Use iPhone as a webcam
  • Use iPhone with Desk View
  • Stream audio and video with AirPlay
  • Use one keyboard and mouse to control Mac and iPad
  • Hand off between devices
  • Unlock your Mac with Apple Watch
  • Make and receive phone calls on your Mac
  • Sync music, books, and more between devices
  • Manage Apple ID settings
  • Set your Apple ID picture
  • What is iCloud?
  • What is iCloud+?
  • Store files in iCloud Drive
  • Share and collaborate on files and folders
  • Manage iCloud storage
  • Use iCloud Photos
  • What is Family Sharing?
  • Set up Family Sharing
  • Set up Screen Time for a child
  • Share purchases with your family
  • Watch and listen together with SharePlay
  • Share a Photo Library
  • Collaborate on projects
  • Find content shared with you
  • Find your family and friends
  • Play games with your friends
  • Listen to podcasts
  • Watch TV shows and movies
  • Read and listen to books
  • Read the news
  • Track stocks and the market
  • Apple Music
  • Apple Arcade
  • Apple News+
  • Podcast shows and channels
  • Manage subscriptions in the App Store
  • View Apple family subscriptions
  • Guard your privacy
  • Use Mail Privacy Protection
  • Control access to your camera
  • Use Sign in with Apple for apps and websites
  • Set up your Mac to be secure
  • Keep your data safe
  • Create a passkey
  • Understand passwords
  • Keep your Apple ID secure
  • Find a missing device
  • Get started with accessibility features
  • Connect an external display
  • Use the built-in camera
  • Connect a Bluetooth device
  • Use AirPods with your Mac
  • Optimize your Mac battery life
  • Optimize storage space
  • Burn CDs and DVDs
  • Control accessories in your home
  • Use Windows on your Mac
  • Resources for your Mac
  • Resources for your Apple devices

self assigned ip address issue mac

Resolve IP address conflicts on Mac

If you’re connected to a network using TCP/IP, and you are having problems connecting your Mac to other computers or services, there may be a conflict with your computer’s IP address and the IP address of another device on the network.

Depending on the way your IP address is provided, there are several things you can try to resolve the conflict.

If you receive an IP address automatically using DHCP, there could be another device on the network that is already using that IP address. In most cases, the DHCP server will provide your Mac with another IP address in a few minutes. Try connecting again.

Close the app that is using the connection (such as Safari or Messages), then open the app again.

Put your computer to sleep, wait a few minutes, then wake it from sleep. Try connecting again.

Close all open apps and restart your computer.

If you entered your IP address manually, make sure you entered the correct address. If you’re connecting to a network that’s managed by an administrator, check with the administrator. See Enter TCP/IP settings .

If you’re on a home network, and none of these suggestions fix the problem, try disconnecting from the network and turning off all the devices that are connected to it (for example, your router and modem). Wait a few minutes, then turn the devices back on. See Restart an external device .

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

Self-assigned IP address

I sometimes have problems dropping IP addresses after changing networks and get stuck with a self-assigned IP that I cannot drop by hitting the renew "DHCP Lease" button on my Mac OS X.5 Leopard. The only work around is to manually give myself a "good" IP, shut down my computer, then boot up and switch back to regular DHCP. Any ideas?

Troggy's user avatar

4 Answers 4

Somtimes issues like these can arise from malformed network preferences. Try deleting (or just moving/renaming) these files:

jweede's user avatar

Here's some fairly unpleasant instructions from apple http://support.apple.com/kb/TS1920

Col's user avatar

It must be the problem with your IP Address. 169.254.*.* is an address reserved for local ip address. If your DHCP server uses that address then you could not connect to the internet.

Please check this Internet connection does not work with an IP address space of 169.254.xxx.xxx from ISP, router, or manual configuration

arthankamal's user avatar

Connecting using the plain WEP password was allowing me to connect (to a link sys Wi-Fi) but DHCP didn’t work and I got the dreaded self-assigned address.

To fix it we logged in using the HEX version of the same key (which we found by looking on the router via a wired connection).

On network preferences, select Network Name Join Other Network... then type in the name of your own network, select WEP...HEX. and enter the HEX version of the WEP key.

Giacomo1968's user avatar

You must log in to answer this question.

  • The Overflow Blog
  • How to convince your CEO it’s worth paying down tech debt
  • Optimizing both hardware and software for GenAI sponsored post
  • Featured on Meta
  • Upcoming privacy updates: removal of the Activity data section and Google...
  • Changing how community leadership works on Stack Exchange: a proposal and...

Hot Network Questions

  • Find the heaviest and the second heaviest coins
  • highlighting specific lines in different colors when starting a scipt with printf
  • A word for a man of few, but well thought-out, words
  • How to print the number of elements in the first and second rows of an array respectively?
  • no power in the ceiling wire
  • Why did PC users need partitions in the 1980s
  • How to make a fiction more visualizable by readers?
  • Refrigerator life of live clams
  • Brian Chen's Splash 2016 hunt #5
  • Do you know about topologies that look like this?
  • Why does Mark identify the lake in Galilee as the "Sea of Galilee"?
  • Book about sentient tanks, a fake war, fighting on the heart of a gas giant scoured by a neutron star, medical AI running rampant
  • How does a regenerator keep their memories?
  • Translation request: DEVM ⋅ DELECTARE ⋅ DEI ⋅ LAVDES ⋅ DECORARE
  • How does an explorer civilization survive the Dark Forest Scenario?
  • Firefox on Ubuntu 22.04 is garbled on HP laptop
  • Thunderwave in constricted area
  • How would fire behave in an oxygenless atmosphere with a significant percentage of chlorine?
  • How to interpret functional symbols in a many-sorted language in the corresponding single-sorted language?
  • Why is the horizon problem a problem?
  • Light Up (Akari), but on a real projective plane!
  • Why does re-scaling my density plot using counts change the y-axis so much?
  • Rate of return on an Life Insurance Annuity
  • What happens if a slow train hits you?

self assigned ip address issue mac

  • Digital Marketing
  • Privacy Policy
  • Term And Conditions

Troubleshooting Self-Assigned IP Address Issues On Mac

self assigned ip address mac

Many macOS users encounter a common problem where their devices assign themselves a self-assigned IP address, leading to the creation of an ad-hoc network connection when needed. Consequently, self-assigned IP address Mac users may continuously receive ‘Internet not working’ messages despite having a functional Wi-Fi connection.

In the event that hardware is detected but communication with the DHCP server to acquire an IP address encounters difficulties, ad-hoc network formation occurs. The underlying problem in this scenario stems from Firewall configuration issues within the system, self-assigned IP address mac and there exist multiple methods for addressing this challenge.

What Does The Term “Self-Assigned IP Address” Error Mean?

The issue known as the ‘Self-Assigned IP Address’ occurs when a device is unable to establish a connection with a Dynamic Host Configuration Protocol (DHCP) server, resulting in the device assigning an IP address to itself. In these situations, users commonly face an error notification that reads, self assigned ip address mac  ‘Wi-Fi has automatically assigned an IP address and is unable to establish an Internet connection.'”

In most cases, self-assigned IP addresses Mac computers and smartphones depend on DHCP servers to acquire an IP address when connecting to a network. Nevertheless, when these devices encounter difficulties in reaching a DHCP server or when the server is unresponsive, macOS initiates the formation of an ad-hoc network, assigning itself a self-generated IP address through the Automatic Private IP Addressing (APIPA) mechanism. This action enables the device to communicate with other devices within the same network segment using link-local addressing, self self-assigned IP address Mac but it restricts internet access and communication with devices outside of the network’s range.

Factors Leading To The Occurrence Of The “Self-Assigned IP Address” Error

Here are the primary reasons for encountering the “self-assigned ip address error” on your mac:.

  • Challenges with DHCP Server: When a device seeks to establish a connection with the server, it initiates a DHCP request. Nevertheless, in instances where the server is offline, non-responsive, or inaccessible, self-assigned IP address Mac the device may autonomously allocate an IP address.
  • Challenges Arising from Network Configuration Issues. Disruptions in Network Infrastructure or Incorrectly Set Network Preferences can Compromise Device Connectivity with DHCP Servers. Moreover, Inaccurate IP Address Allocations and IP Address Conflicts can Arise from DHCP Servers with Incorrect Configurations when Multiple Devices Seek to Connect to the Same IP Address.
  • Challenges with Wi-Fi Connectivity: When a device struggles to maintain a reliable link to the Wi-Fi network or router, a self-assigned IP address mac it might encounter difficulties in connecting to DHCP servers to request an IP address.
  • Using an Older MacOS Version: When employing an antiquated macOS iteration, compatibility issues with contemporary Wi-Fi standards and network protocols may arise, hindering the establishment of a stable connection. Consequently, a self-assigned IP address Mac can result in communication failures with DHCP servers and the inability to acquire a valid IP address.
  • Issues with Network Interface Hardware and Software: Connectivity problems stemming from outdated network drivers, self-assigned IP address Mac network interface card malfunctions, or software configuration issues can lead to conflicts between your device and DHCP servers, resulting in a lack of a valid IP address allocation.

Addressing The “Self-Assigned IP Address” Issue: Troubleshooting And Resolution:

The “Self-Assigned IP Address” error can manifest due to multiple causes, yet there are several effective methods to address this issue. Here’s a sequential list of potential solutions to assist you in resolving it. Please remember to attempt them in the specified order.

Initiate A Reboot Of Your Mac And Router:

  • You have the option to initiate a Mac restart by clicking on the Apple icon and choosing “Restart.”
  • To initiate a router reset, the self-assigned IP address Mac first turns off the device pauses for approximately 30 seconds, and then proceeds to power it back on.

Renewing A DHCP Lease:

  • Navigate to the Apple logo and access ‘System Preferences’.
  • Please select the “Network” option and pick the currently connected network.
  • Select “Details” to open a new window.
  • Navigate to the “TCP/IP” tab and select the option to “Refresh DHCP Lease.
  • Press “Apply” to confirm.

Verify Your Network Configuration:

  • Please access the “System settings” menu and then choose the “Network” option.
  • Choose the network associated with the self-assigned IP address.
  • Navigate to the “TCP/IP” section and confirm that “IPv4 Configuration” is set to “DHCP” and “IPv6 Configuration” is set to “Automatic.
  • Navigate to the “DNS” tab and remove the DNS servers listed by tapping the minus button.
  • Please select ‘OK’ to confirm and save the modifications.

Establishing A Fresh Network Location:

  • Select the Apple icon, access the ‘System Preferences’ menu, and then choose ‘Network.
  • Click on the dropdown menu situated in the lower right-hand corner of the window, opt for “Locations,” and then choose “Edit locations.”
  • Press the addition symbol (+) to create a new location entry, assign a name to the location, and then select “Done.”
  • Choose the newly created location over “Automatic” when deciding between the two options.

Resetting The Application Layer Firewall On macOS:

  • Access the ‘Finder’ window, navigate to the ‘Go’ menu, and select ‘Go to folder.
  • Input “Library/Preferences/” into the dialog box.
  • Select the “com.apple.alf.plist” file located within the “Preferences” directory and either remove it entirely or relocate it to your desktop if you wish to retain the option to restore the modifications later.
  • Initiate a system reboot on your Mac.

Strategies For Avoiding IP Errors In The Future:

Preventing IP Address Acquisition Problems Made Easy: Maintaining Vigilance Over Your Software and Hardware for a Smooth Experience. Here are some helpful tips to steer clear of IP address errors in the future:

  • Ensure your macOS remains current at all times.
  • Regularly reboot your router or modem.
  • Utilize a single active network connection at a given moment to prevent network configuration conflicts.
  • Ensure that your network drivers are current and fully updated.
  • Consider employing premium-grade networking hardware.
  • Whenever feasible, utilize an ethernet cable to establish a more dependable connection between your Mac and the modem.

What Causes My MacBook To Acquire A Eelf-Assigned IP Address?

Typically, this issue arises from either a faulty cable connection or a Router/Modem’s self-assigned IP address mac reluctance to assign IPs through DHCP. “Revise Network Settings Using Network Locations in Mac OS X to Establish a New Network Configuration.”

Why Is My Mac Displaying The Message That There Is No IP Address For My WiFi Connection?

Alternatively, you can manually refresh the IP address, a process commonly referred to as renewing the DHCP lease. When the lease has expired and the assigned IP address is already in use by another device, the self-assigned IP address mac your Mac will be allocated a new address.

What Is The Reason For Receiving A 169.254 IP Address?

When encountering a 169.254.x.x address, it indicates an unreachable DHCP server, resulting in the PC’s inability to function due to the absence of a connection to or from a router. To resolve this issue, self assigned Ip address Mac diagnose the reason behind the PC’s inability to establish communication with the DHCP server.

How Can You Resolve An Issue Where Ethernet Displays A Self-Assigned IP Address And Cannot Establish An Internet Connection?

To access System Preferences and choose the “Network” option, follow these steps. Within the active network account (either Ethernet or Wi-Fi), access the Location toggle at the top of the screen. Opt for a different Location and follow the brief checklist provided. Finally, the self-assigned IP address Mac set it as the Active Location to restore your internet connection.

For more information click here :

RELATED ARTICLES MORE FROM AUTHOR

Chatgpt: what can we do with it, seo copywriting: the ultimate handbook, remnant 2 exploits unveiling the power for ultimate gaming, leave a reply cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Recent Posts

 width=

Google Doodle Games Halloween: Highly Regarded You Should Play

 width=

Troubleshooting Guide: How To Fixing iPhone Not Receiving Android Text

 width=

Download The Modern App Ltd App For iOS And Android Devices In 2023.

 width=

Mastering The Art: How To Stop Phone From Turning Off

 width=

SAM Online FTP Server IP Address: 172.16.5o.4

Latest posts.

 width=

Telegram Without Phone Number or SIM card: Instructions

 width=

EDITOR PICKS

 width=

Exploring The Possibilities: Using Telegram Without Phone Number

 width=

How To Sign Out Of iMessage: A Step-By-Step Guide For iOS And Mac Users

 width=

Unlocking Joy: How To Easily Apple Redeem Gift Card For A World Of Possibilities

  • Technology 23
  • Digital Marketing 1

Saint

Hand-Picked Top-Read Stories

self assigned ip address issue mac

5 Best Ways to Avoid Rash and Burns from Apple Watch

self assigned ip address issue mac

7 Best Ways to Fix Sound Controls Not Working on Mac

self assigned ip address issue mac

5 Ways to Prevent Accidental Calling of Favorites on iOS After Hang Up

Trending tags, how to fix self assigned ip address error on mac.

Need to Fix Self Assigned IP Address Error on Mac?

There can be various reasons why the internet on your Mac isn’t working properly. One example is the Self Assigned IP Address error, which many Mac users have reported . In this error, although your device is connected to a network, the internet stops working. 

In order to recognize this error, simply look below your network connection to find “Self Assigned IP Address”. This issue can arise due to several factors, such as poor internet connection or corrupted Plist files.

The good news is you can easily fix self assigned IP address error on Mac by many practical methods. To help you out, we have gathered some of the most effective solutions below. However, before opting for any troubleshooting fixes, identify the main cause first.

So, let’s begin!

1. Power Cycle Modem/Router.

Before you jump to some serious fixes, determine if the problem is related to your internet connection. Check to see if the Wi-Fi works fine on other devices connected to the same network. If all of them are experiencing poor connectivity or similar issues, we recommend you power cycle the modem.

To do so, follow the steps below:

  • Start by unplugging the modem from the power supply. 
  • Wait for a while. 
  • Then, reconnect the modem to the power source and press the power button.

This should fix the self assigned IP address error on Mac. 

2. Renew the DHCP Lease.

A DHCP lease is an IP address assigned to a device on a network for only a limited period of time. Every time you connect to a wireless network, the DHCP server assigns a new IP address. 

So, when you encounter the self assigned IP address error on Mac , you can manually renew the DHCP lease. 

Here’s how to do it:

  • Go to the Apple menu from the top-right corner. 
  • Next, click on System Preferences . 

System Preferences on Mac

  • From the new window that appears, select Network . 

Network Settings on iPhone

  • From the left sidebar, click on your connected Wi-Fi or Ethernet network and select Advanced . 

Wi-Fi settings on iPhone

  • Now, go to the TCP/IP tab and select Renew DHCP Lease . 

Renew DHCP Lease

  • Finally, click on OK to save these changes. 

Once done, the self assigned IP address error on Mac should be solved. If not, follow the next solution from this guide.  

3. Create New Network Location.

If directly renewing the DHCP lease was of no use and you’re still encountering the Self assigned IP address error on Mac, then this method is for you. Just create another network location and then reset your Mac’s IP address. 

Each network location includes settings for a specific network port. That way, you can easily switch between various network locations without having to reconfigure every time.

Below are the steps you must follow:

  • From System Preferences , select Network . 
  • After that, click on the drop-down menu icon next to Location . 
  • Click on Edit Locations . 

Self Assigned IP Address Error on Mac

  • Then, click on the + icon and enter the name of your network in the text field. 
  • Click on Done and choose your Wi-Fi network from the left pane. 
  • Now, choose Advanced . 
  • Click on the TCP/IP tab and select Renew DHCP Lease . 
  • At last, select OK to confirm these changes. 

4. Delete the PLIST Files.

The Plist files or Preference files contain important data related to configuring apps and services within your macOS environment. Occasionally, these files can become corrupt, damaged, or even get attacked by malware or a virus.

To handle such situations, you can discard the Plist files to eliminate the error. This method will not harm any program or your computer so it is safe to follow.

Use the instructions below to do it:

  • Launch Finder from the taskbar. 
  • After that, click on Go from the top bar and select Go to Folder . 

Self Assigned IP Address Error on Mac

  • Now, copy and paste the following in the text field and click on Go :
  • From System Configuration , right-click on these folders and select Move to Trash :
  • Finally, reboot your device and check if you’re able to connect to the internet now. 

5. Set Service Order.

At times, you may be connected to more than one type of network interface. If you’re getting the self assigned IP address error on Mac when connected to one of them, you can change the service order to prioritize another network type.

Here’s how:

  • Head over to the Apple logo and click on System Preferences . 
  • From there, click on Network . 
  • Next, click on the gear icon from the bottom-left corner and choose Set Service Order . 

Set Service Order

  • From the new window that shows up, drag your network to the top. 
  • Lastly, click on OK .

6. Switch to Google DNS.

Your ISP server could be unreliable when it comes to keeping their servers up and running. It’s also possible that they have restricted access to certain web pages. In this case, you may experience slow service and even encounter self assigned IP address error on Mac.

Switching to a Google DNS might be a good option, not only to load pages faster but to access geo-restricted content. 

Follow the steps below to do it:

  • From the System Preferences window, go to Network . 
  • After that, click on the lock icon . 
  • Provide your login credentials. 
  • Now, click on your network from the left pane and select Advanced . 
  • Click on the DNS tab from the top and select ‘ + ’ from the bottom-left corner. 

Self Assigned IP Address Error on Mac

  • Type in 8.8.8.8 and 8.8.4.4 in the DNS servers field and select OK . 
  • Lastly, reboot your Mac. 

7. Reset the Firewall on Your Mac.

If you’ve not properly looked into the Firewall settings, it’s high time you do so. This protection program can sometimes show extreme behavior and block sites for safety. When that happens, you may receive the self assigned IP address error on Mac.

To resolve this, simply reset the Firewall to bring back the default configuration of the program. Hopefully, this will allow you to access content that wasn’t visible earlier.

Here’s what you need to do:

  • Go to Finder and select Go from the top. 
  • Click on Go to Folder . 
  • Next, type in the following in the text field and click on OK :
  • Now, delete the com.apple.alf.plist file. 

Self Assigned IP Address Error on Mac

  • Restart your computer, and hopefully, this method will resolve your issue.

That was it! You’ve now made it to the end of our guide on how to fix self assigned IP address error on Mac. for more tips or suggestions, head over to the comment section below and help fellow readers.

If this guide helped you, please share it. 😊

Aimen Choudhry

Aimen Choudhry is an architecture student who has always been fascinated by science. She now finds her therapy researching and writing about the latest technology and the issues that come alongside. Otherwise, you’ll find her playing video games, listening to music, or watching fantasy/sci-fi movies.

View all posts

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

MUO

How to Find and Change the IP Address on Your Mac

Quick links, how to find your ip address on a mac, how to change the ip address of your mac, how to set a manual ip address on macos, ip address conflict troubleshooting, public vs. private ip addresses on mac.

  • You can find and change your Mac's IP address through the Network panel in System Settings or by using Terminal commands.
  • Changing your IP address can help resolve network conflicts, such as when you receive an "another device is using your IP address" message.
  • If you set a manual IP, it's important to reserve this in your router to make sure your Mac consistently uses the same address.

Need to double-check your Mac's IP address or adjust it to avoid a network conflict? We'll show you how to easily find and change the IP address of your Mac.

The easiest way to check your Mac's IP address is through the Network panel in System Settings . Click the Apple menu in the top-left of your screen and choose System Settings to open it, or use Cmd + Space to search for "settings" with Spotlight.

Here, click Network from the left sidebar to open the relevant menu. Your current network shows at the top, with a green Connected dot—this is Wi-Fi , assuming you're using a wireless connection. Click the one you're using.

On the resulting page, you'll see the name of your current network at the top. Click the Details button next to this to open a new window with full information about the network.

There, you'll see an IP address field, which displays the current private IP address of your Mac on your network. For convenience, the Router 's IP address is also shown. You can select these addresses to copy and paste them elsewhere.

View Your Mac's IP Address Through the Terminal

The above method is quick and reliable, but you can also see your Mac's IP address using a Terminal command if you don't want to click through multiple menus. Open Terminal by searching for it on Spotlight ( Cmd +Space ).

Next, enter the following command to show your IP address on a Wi-Fi connection:

For an Ethernet connection, use this command instead:

Either way works; if you can memorize this handy Terminal command , it's a bit faster than clicking through the System Settings menus.

While viewing your computer's IP address is enough in some cases, what about when you need to get a new IP address on your Mac? This is necessary if you see the "another device is using your IP address" message, though you can change your IP address for other reasons too.

To change your Mac's IP address, head back to the same Network menu mentioned above. On the window where you confirmed your Mac's IP address, click the TCP/IP menu on the left. This shows more details about your Mac's current network connection. Next to Configure IPv4 , you'll probably see Using DHCP .

DHCP, or Dynamic Host Configuration Protocol , allows routers to automatically manage IP addresses. This is why when you connect a new device to your network, you don't have to manually select an open IP address for it.

To get a new IP address from your router, click the Renew DHCP Lease button. This will result in your computer releasing its IP address and getting a new one, which should resolve any duplicate IP errors.

If you want more control over your Mac's network settings, you can assign an IP address manually (also called a static IP). With this option, the specified address will not change for your device, which can further help resolve issues with duplicate IP addresses.

To set a static IP address on your Mac, return to the TCP/IP tab mentioned above. In the Configure IPv4 field, click Using DHCP and change it to Using DHCP with manual address .

You can also choose Manually if you want. However, the former option is more convenient as it only has you specify the IP address, so you don't need to confirm other information like your router's IP.

Finding an Unused IP Address

When setting a manual IP, you'll need to choose an IP address that isn't already in use on your network. Otherwise, you'll create a duplicate IP problem. While you can log into your router to check IP addresses in use , it's faster to check for an open one using the Terminal.

To do so, you first need to know the IP format of your network. You'll find this on the TCP/IP tab visited earlier—the address of the Router is the format your network uses. This is often 192.168.0.X (with the last digit being unique to each device) but you should double-check what yours is.

Once you know, use Cmd + Space to open Spotlight and search for Terminal. Then enter the following command to ping an address and see if it exists on your network, replacing the address with one you want to use:

If this results in something like 64 bytes from 192.168.0.102 followed by other information, that means a device with that address exists on your network and is responding to your ping. Don't use that address for your Mac; try the ping command again with a new address until you find one that's available.

If you have lots of devices on your network, you might wish to use the arp -a command to filter out unavailable options. This displays all IP addresses on your network at once, showing what's already in use.

When your ping to an IP repeatedly shows Request timeout , you've found a free address. You can enter that IP address in the IPv4 Address field of the Network settings page. Once you do this and confirm with OK , your Mac's IP address will stay the same unless you change it.

Reserving a Manual IP in Your Router

For best results, when you set a manual IP address on your Mac, you should also reserve that address in your router. That way, your router knows that your Mac expects to always use the same address.

To open your router's management panel, open your browser and type the IP address that appears next to Router in the TCP/IP panel you used earlier. You'll then need to log in with your router admin and password, which is different than the password you connect to Wi-Fi with.

If you've never logged into your router before, check Routerpasswords.com to find the default for yours, then be sure to change it for security. And if you're not familiar with working in a router, you may want to read our general router introduction first.

IP address reservation options will differ slightly depending on your router. On my ASUS router, for instance, the relevant menu is under LAN > DHCP Server . Turn Enable Manual Assignment on, then in the box below, you can select a device and reserve an IP address for it. You don't need to change the DNS Server , but you may want to set the Host Name , Description , or similar box to remember what's what.

Given that the router identifies devices by MAC address (not related to the Mac platform), you'll need to pick out your Mac from the list. I've previously named my devices (under Network Map ) to make them easier to identify. If you're not sure which item is your Mac, you'll need to find your Mac's MAC address manually.

See our guide to static IP addresses for more help.

If you needed to change your Mac's IP address because you saw an "another device is using your IP address" error, resetting and renewing your IP address or assigning a manual IP should have fixed the problem. If not, we have a guide to fixing IP address conflicts that you should consult next.

No two devices on your network can have the same address, since your router won't know which is which. This is why you see this message, which shouldn't happen unless your router is acting up or you've manually assigned a duplicate address.

However, it can also happen if a computer is in hibernate mode for a long time; when it wakes up, it might have an old IP address that your router has since assigned to something else. In that case, releasing and renewing the address as described above should fix it.

Finally, we should quickly mention the two different kinds of IP addresses for clarity.

Everything we discussed above pertains to private IP addresses, which are used only on your network. Most home networks use the same range of addresses (often starting with 192.168.0.X ), but those values are only used by your local network. A manual (or static) private IP makes it easier to locate devices on your network by their IP addresses.

In contrast, your public IP is what the rest of the internet sees when any device on your network goes online. While you can pay your ISP for a static IP address, a dynamic public IP is fine for most people. Your public IP doesn't affect the "another device is using your IP address" error that you might see on your Mac.

To find your public IP, simply Google "what is my IP address" or visit a site like MyIP.com . We've compared public and private IPs if you'd like more info. And if you want to change your public IP, try one of the best VPN services .

We've looked at how to view your Mac's IP address, as well as changing it if needed. In most cases, you can rely on DHCP and don't need to manage IP addresses manually. While setting addresses by hand does have its uses, the increased overhead isn't worth it unless you're doing so to troubleshoot a problem.

How to Find and Change the IP Address on Your Mac

Issues with iOS 17.3.1

Hi, so yesterday I updated my iPad Air (4th Gen) to iOS 17.3.1.

After updating, I noticed that when opening Chrome, or X(Twitter), it would freeze almost immediately and then forcibly restart itself. I also had this issue with Safari and the App Store but it was less frequent and only when I tried to search something. The issue with Safari and the App Store has stopped, but Chrome and X(Twitter) continue to not work. I have tried many things to fix this, like restarts, force restarts, deleting the app and re-downloading it; yet nothing has worked. I’m thinking maybe it is something to do with the update?

If anyone can help, I’d really appreciate it.

iPad, iPadOS 15

Posted on Feb 25, 2024 5:37 AM

Posted on Feb 26, 2024 9:20 AM

I updated to the new update and I can’t connect to mobile Internet or wifi properly. I can’t use apps that require connectivity. Can someone fix this! It’s frustrating!

Loading page content

Page content loaded

Feb 26, 2024 9:20 AM in response to lucah100

Feb 26, 2024 1:43 PM in response to LotusPilot

I did not have problems prior to the update. It’s the update! Why is this happening.

Feb 27, 2024 8:54 AM in response to LotusPilot

Hard restart changes nothing. Taking off private wi-fi address does nothing. I cannot browse on Safari or DuckDuckGo or even connect to banks etc thru apps. My iPhone has the same update and works fine. This is beyond extremely frustrating!!!

sabofrombistrita

Feb 27, 2024 6:23 AM in response to lucah100

since i did the update my yahoo mail app just freezes and restarts! pls help! :(

LotusPilot

Feb 25, 2024 5:47 AM in response to lucah100

If problems persist after performing a forced restart, it may be necessary to reset your iPad settings. While this reset will not cause any loss of data, as a precaution, it is always wise to ensure that you have a current iCloud or iTunes backup before performing the reset:

How to back up your iPhone, iPad, and iPod touch - Apple Support

When you are happy to proceed, you can perform the reset from iPad settings:

Settings > General > Transfer or Reset iPad > Reset > Reset All Settings

If the problem still doesn’t clear, the next step is to reset the iPad to factory settings - after which you will need to restore your data from a backup:

Restore your iPhone, iPad, or iPod to factory settings - Apple Support

Feb 26, 2024 9:26 AM in response to Estherwig

Estherwig wrote:

WiFi/Internet connection difficulties are usually an indication that your device does not have a routable IP Address - your IP Address usually being assigned by DHCP. When problems occur, your iPad may only have a self-assigned link-local IP address that begins 169.254.x.x.

You can verify your DHCP-assigned IP Address from settings:

Settings > WiFi > [Your WiFi Network / SSID]  - tap the blue “i” icon -  [IPv4 Address] IP Address

If you have a VPN App or profiles installed, or a security/AV/firewall App such as Norton, these may be interfering with DHCP and preventing your device from obtaining a valid IP Address for the WiFi network to which you are attempting to connect. The resolution is usually simple; if installed, you may only need to temporarily disable or remove the Security App and/or VPN.

DHCP is frequently used to automatically obtain an IP Address. Until your iPad has a valid IP Address to connect to your network, you will not have an internet connection. Disabling or removing VPN and/or the offending security App should allow DHCP to operate normally - allowing connection to your network and the internet.

If this resolves your issue, the VPN and/or security App can be reinstated after the connectivity problem has been resolved.

If you continue to have difficulties, check to see if your iPad is using the WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.

Settings > WiFi > [Your WiFi Network / SSID]  - tap the “i” icon -  Private Address

The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can cause issues if specific MAC addresses are expected by your WiFi Router. You may need to disable this feature - and can be enabled or disabled for each individual network.

Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support

Elkarl77

Feb 27, 2024 8:45 PM in response to LotusPilot

My iPhone is doing same exact thing. I have gone through all supports troubleshooting and nothing worked this 17.3 update destroyed my phone I cannot make any calls or texts

IMAGES

  1. How to Fix the Self Assigned IP Address Issue on Mac

    self assigned ip address issue mac

  2. How to Fix Self-assigned IP Address Error on Mac

    self assigned ip address issue mac

  3. How to Fix Self Assigned IP Address Error on Mac

    self assigned ip address issue mac

  4. Fix Self-Assigned IP Address Issue On Mac

    self assigned ip address issue mac

  5. How To Fix Common Connection Wi-Fi Issue: Self-assigned IP On MacBook

    self assigned ip address issue mac

  6. How To Fix Internet Not Working Due To Self-Assigned IP Address Issue

    self assigned ip address issue mac

VIDEO

  1. Understanding an IP Address

  2. Setting Openmediavault IP address to static #short

  3. find ip Address Mac

  4. IP and Mac addresses of Device #shortsfeed #youtubeshorts #shorts #device

  5. How to find ip address and MAC address another computer

  6. IP  address always get them

COMMENTS

  1. How to fix "self-assigned IP address" issue on Mac

    To fix the "self-assigned IP address" error on your Mac, renew DHCP lease, restart your network devices, rejoin your Wi-Fi, or check your network settings. Is your MacBook struggling to access the internet, though your Wi-Fi or Ethernet works fine? This can be due to the self-assigned IP address error on your Mac. Worry not!

  2. What Is A Self Assigned IP Address And How To Fix This Mac Error

    Mac's self-assigned IP error prevents your computer from establishing a working internet connection, rendering the Mac essentially useless. Let's look at a self-assigned IP address and what you can do to fix it. What is a Self-Assigned IP Address?

  3. How do I get rid of a self assigned IP address?

    How do I get rid of a self assigned IP address? I've tried all the usual things like restarting the computer and modem. Other devices in the house are able to connect. Sitting side by side. I've had this iMac for a number of years but never encountered this before.

  4. How to Fix the Self Assigned IP Address Issue on Mac

    Restart your modem Before trying any other method to fix the internet issue restart your modem to see if it works. Click the 'Wi-Fi' button from the top menu on the Mac to turn it off. Please wait for a few minutes and then turn it back on. Check to see if the issue is fixed.

  5. How to fix "self-assigned IP address" error on Mac

    An outdated MacOS. If you're using an older MacOS version, it may not be fully compatible with the new Wi-Fi standards or network protocols and may struggle to establish a solid connection. This can lead to failed communication with DHCP servers and a failure to obtain a valid IP address. Network interface hardware or software problems.

  6. How to Fix Self-assigned IP Address Error on Mac

    Several reasons for a self-assigned IP address error can occur on a MAC. Some of the most common causes include: Incorrect network settings: The network settings on the MAC may be configured incorrectly, which can prevent it from obtaining an IP address from the router or DHCP server.

  7. What is Self-Assigned IP and How to Fix it • macReports

    Check your connection settings: On your Mac, go to System Preferences > Network. Then select the network that shows this error and click Advanced. Select the TCP/IP tab and then make sure that "Configure IPv4" and "Configure IPv6" are set to Using DHCP and Automatically, respectively.

  8. Resolve "Self-Assigned IP" Errors for Apple Mac

    One possible result of the inability to get online is that you have what is referred to as a self assigned IP address. This usually happens when your router (which normally provides you an IP address) does not provide you an IP address to talk to other computers. This guide will help you to troubleshoot self assigned IP addresses.

  9. Self-Assigned IP Address Error on Mac: How to Fix?

    The problem of No Internet on Mac due to Self-assigned IP Address can be fixed by removing certain files related to network connectivity on your computer. in taskbar > click on the tab in top-menu bar and select Go to Folder option in the drop-down menu. In Go-to window, Type /Library/Preferences/SystemConfiguration/ and click on the

  10. Fix Self-Assigned IP Address Issue On Mac

    Method 1. Reset Network Configuration Method 2. Renew DHCP Lease Method 3. Create New Network Location Method 4. Reset the Firewall Method 5. Set Service Order Method 6. Change DNS Servers Video on Fix Self-Assigned IP Address Issue on Mac Download Computer Malware Repair Tool

  11. How To Fix Internet Not Working Due To Self-Assigned IP Address Issue

    1. On your Mac launch finder and click on Macintosh HD. (Don't see Macintosh HD? See here) 2. Click on the Library folder and go to Preferences. 3. Now click on the SystemConfiguration folder. 4. Next put the following files in trash. com.apple.airport.preferences.plist com.apple.network.identification.plist

  12. What does "self assigned IP address mean"…

    Mac Pro Posted on Feb 28, 2022 1:39 PM Me too (933) Reply Best reply BDAqua Level 10 238,445 points Posted on Feb 28, 2022 2:08 PM It means it's not getting an IP handed out to it by the Router or Modem. Make a New Location, Using network locations in Mac OS X ...

  13. How to Solve the Self-Assigned IP Error on Macs?

    Reset the firewall on your Mac: In some cases, the firewall settings on your Mac can interfere with the network connection and cause the self-assigned IP address error. To reset the...

  14. Resolve IP address conflicts on Mac

    Close the app that is using the connection (such as Safari or Messages), then open the app again. Put your computer to sleep, wait a few minutes, then wake it from sleep. Try connecting again. Close all open apps and restart your computer. If you entered your IP address manually, make sure you entered the correct address.

  15. macos

    0. Connecting using the plain WEP password was allowing me to connect (to a link sys Wi-Fi) but DHCP didn't work and I got the dreaded self-assigned address. To fix it we logged in using the HEX version of the same key (which we found by looking on the router via a wired connection). On network preferences, select Network Name Join Other ...

  16. IP address over ethernet is self-assigned…

    IP address over ethernet is self-assigned when using a gigabit adapter Hi, I'm using a MacBook Air, M2, running Sonoma 14.1.2. It connects OK to the internet over Wi-Fi but cannot connect over ethernet when using a gigabit adapter in an outbuilding in the garden. This is the situation:

  17. Troubleshooting Self-Assigned IP Address Issues On Mac

    Vadim - 7 September 2023 0 45 Many macOS users encounter a common problem where their devices assign themselves a self-assigned IP address, leading to the creation of an ad-hoc network connection when needed.

  18. How to fix issue

    Video showing how to fix issue - Self-Assigned IP address MacDetailed instructions - https://blog.pcrisk.com/mac/13307-fix-self-assigned-ip-address-issue-on-mac

  19. How to Fix Self-Assigned IP Address Issue on Mac

    1. Go to "System Preferences." 2. Select "Network." 3. Choose your active network connection (Ethernet or Wi-Fi). 4. Click on "Advanced." 5. Navigate to the "TCP/IP" tab. 6. Click "Renew DHCP...

  20. Self assigned IP with Mac Mini M1

    We have managed to solve our problem of self-assigned IP addresses. when starting up an M1 Mac Mini. The initial set-up used a Macbook. Air Time Machine backup as the source. This source included an. Internet Security App that was later found is not compatible with M1. and may have been blocking all input / output from the network.

  21. MacOS Monterey self assigned IP troubleshooting : r/MacOS

    It reports as "Self Assigned IP" with yellow in Network preferences. This presents as the computer having no internet and showing an assigned IP outside of the range of the DHCP server. I've tried: reboot all devices including router and switch. manual IP address. assigning random number value in "DHCP Client ID" in the TCP/IP ...

  22. How to Fix Self Assigned IP Address Error on Mac

    One example is the Self Assigned IP Address error, which many Mac users have reported. In this error, although your device is connected to a network, the internet stops working. In this error, although your device is connected to a network, the internet stops working.

  23. Self assigned IP address

    All I get is a self assigned IP address. I have tried renewing the DHCP, restarting the computer, resetting the network, etc. Nothing seems to work. I have the Mac OS X 10.7.3 version. Please help!!! Show more Less. Mac Pro, Mac OS X (10.7.3) ... Hi I know is been a long time since this post but this self assigned IP adress issue just happened ...

  24. How to Find and Change the IP Address on Your Mac

    To change your Mac's IP address, head back to the same Network menu mentioned above. On the window where you confirmed your Mac's IP address, click the TCP/IP menu on the left. This shows more ...

  25. Issues with iOS 17.3.1

    WiFi/Internet connection difficulties are usually an indication that your device does not have a routable IP Address - your IP Address usually being assigned by DHCP. When problems occur, your iPad may only have a self-assigned link-local IP address that begins 169.254.x.x. You can verify your DHCP-assigned IP Address from settings: